AMERICAN DJ LED VISION dmx and sound to light

Alright folks, this guy here is an LED light. It's from a company called American DJ and it's known as the LED Vision. Now don't ask me why I'm on the floor but I thought give it a different camera angle. Hmm, it's got 26 LEDs, it's sound to light and it's also DMX controllable. So basically you can plug it into a DMX controller and it'll do a light show for you. Alternatively you can just plug it in and let the music do the work. I'm going all blurry. Yes, so what I'm going to do, I'm going to pause the camera and I'll stick it on a tripod. Hmm, right here we go, we're looking at the back of it now. Well here we've got DMX in and DMX out. Now there you can see mode up and down.

I know it's a bit blurry, but this is Punk TV. Now basically what you can do here, you can set this unit so even if you're just using it sound to light, you can actually set it so you can have the LEDs doing a different light show even though it's just on sound to light. For example, you can have the actual LEDs flashing quite fast, flashing quite slowly. You can have them so they're quite dim and they get brighter. One of the main advantages of LED lights is they're very, very low power. So, for example, I mean, I know many a time I've been to a gig and I've turned up and there's actually only been one plug in the wall.

And out of that one plug you've got to run an amplifier, all your kit and your lighting rig. And if you've got an amp that's 1,000 watts and say four power cans at say 250 watts each, you know, you're starting to run quite a few amps. But, you know, the way LEDs are going now, they don't take much power and they're very bright. There you go, a bit of a look at this guy here from American DJ and it's known as the LED Vision. Practice and enjoy.

This transcript was produced automatically from the audio of the video and may contain mistakes.