EFX-1000. Video 1. A look at the back( READ DESCRIPTION)

Alright folks, in this video I'm going to show you the back area here of the Pioneer EFX1000, give you a general idea of what all these are for. Generally what you'll do is you'll go from your DJ mixer, from the master output, you'll go into the input here, into the RCA plugs and then you'll go from the output into your actual power amplifier or your hi-fi amp. So what happens, you go into the input and then it'll go into all the internal workings here and then you go from the output And then you'll be able to use everything inside the actual EFX. Alternatively, you can use these here which are known as jack plugs, so input and output. Here we have MIDI out and in, so basically you can use MIDI also. EFX link, that basically is there because some mixers will actually have a direct link from the mixer and you can plug it in here. If you're going from the actual master output

And then you're using these plugs or these, you'll need to set the in-out level to plus 4. If you're just going from a CDJ turntable to the input and then using the output and then going to the input of your mixer, either auxiliary or line, then you'll need to set this to minus 10. We have output select for foot switch and that is an actual plug for your foot switch. And also we have digital in and digital out, the power on-off button and just about there we have the AC in which is the figure of eight plug. So there you go, a little bit of a look to the back of the Pioneer EFX1000. Thanks for watching, practice and enjoy.

This transcript was produced automatically from the audio of the video and may contain mistakes.