KAM Derby 2, Video 1

Alright folks, video number one on this guy from Cam. It's known as the LED Derby 2. Now this particular unit is just sound to light. It is not Master Slave and it's not DMX. What we've got on the back, we've got this safety rope. That's basically where you will attach a safety cable. So you'll have your G-clamp there and you should really have a safety cable there as well as a secondary precaution just in case all of a sudden this guy falls off. It'll hang like so. If we have a look here, we've got a microphone and we've got a mic sensitivity adjustment. Basically, that's for, say for example, you've got this unit right next to your speakers. You can turn the microphone intensity down. If, let's say on the other hand, you've got something like this away from the speakers, you would need for this unit to be able to pick up the sound a lot better. So you would turn this clockwise, anti-clockwise close to your speakers,

There you go. You can see the lenses and the LEDs are in there. In video number one, it's just a basic look at the unit. In video number two, we'll give it a run for its money. And again, LED technology, so low power consumption, low heat, and the LEDs will last far longer than your conventional, say, discharge bulbs or dichroic. So there you go. LED Derby 2 from Cam. Practice and enjoy.

This transcript was produced automatically from the audio of the video and may contain mistakes.