KAM LED COLOURBEAM 6 DMX , Demonstration in the dark

Alright folks, this video we're looking at the LED ColorBeam 6 DMX from CAM. This particular unit, master slave, sound to light and of course, excuse me, it's DMX controllable. Now what is master slave? Well basically let's say for example you had four units. What you would do, you'd have the first unit as the master. You would have a DMX cable from that unit into the second. From the second to the third, the third to the fourth. So basically then, the first unit would pick up the sound and that would be the one in control of the other three. That's how we determine a master-slave. Sound to light on the other hand is basically one unit picking up the sound and doing its own show by listening to the sound. If we look at DMX, then we're looking at a DMX controller in charge of...

This guy will do all of them. Master Slave, Soundalite and DMX. Again it uses LED technology so what we're looking at here is low power consumption, we're looking at bright LEDs, we're looking at low heat, more importantly as well we're looking at the case of low maintenance. You should never have to open this unit up Hours, days or months. They should theoretically last for years. Now this particular unit at the moment is doing its own kind of little show. The light dispersion is very great, the LEDs are very bright and something like this is fantastic for let's say a mobile environment. I will put a link in the description to the CAM website. Practice and enjoy.

This transcript was produced automatically from the audio of the video and may contain mistakes.