KAM LED Scanner 1, Barrel 1 & Moonflower 1

0:00 Video number one on these guys here

Alright folks, video number one on these guys here. Three lights and they're all from a company called Cam. Okay, first off, this one here. This is known as the LED barrel one. The reason it's called the barrel one is because you've got this cylinder here with thin pieces of glass all the way around it. Next up is the LED scanner one. Not dissimilar to the barrel, the only difference is we've got one mirror at the top. And this will move around in, I suppose in a sense, a scanning motion. And last but not least, this guy here, this is the LED Moonflower one. Exactly the same as the other two because we haven't got any mirrors or, well, all that has been chopped off, hasn't it? Right, now I'm not going to beat around the bush here, but I would find it highly unlikely that you'd see something like this in huge big nightclubs. I mean, alright, you know, you may have them in nightclubs.

0:58 What I'll do now we'll just have a look around one of them

The whole idea of I think these three lights, I've had a bit of a mess around with them and it's basically your plug-in and your play. In other words you don't need any DMX or anything like that and if you're a newbie to the likes of say DJ lighting, mobile DJ lighting or maybe you just want a couple of lights in your bedroom you've literally just got to plug it in and that's it. So what I'll do now we'll just have a look around one of them. Okay first off This is not rocket science. Plug it in, there it is and you've basically got two modes on it. You've got a little switch, sound to light or automatic. Now at the moment it's on sound to light so if I keep quiet, which is quite difficult for me, it doesn't do anything. And of course can you imagine now, let's say this is the beat of the music, just tapping on the top of the unit. That's your sound to light. Or down there

This is a switch. That is the only switch on the entire unit. Switch it, and there you go. It'll flash away quite happily all night. Right, let's have a look at another one. Okay, this one here is the LED scanner. Now, with a switch here, switches in three different modes. Up to top position there, what we've got is basically, it's an automatic constant mirror mode. So in other words, if you can see there, Do that all night. Centre position, like that. And what we've got, we've got static mirror mode. And then if we bring that down, sound to light. Now again, you know, these units aren't meant to be all singing and dancing. At the end of the day, if you want all singing and dancing units, you're going to pay an absolute fortune. So, you know, to me that makes perfect sense.

3:07 Three position switch here, identical to the other one

Okay, and finally, this is the LED barrel one. Three position switch here, identical to the other one. If I put that centre, there we go, you can just about see that there, and bring it down, you can see the barrel moving as well. Right, just pause the camera. Right, each one of them has got 48 LEDs. Now, I'm going to be straight to the point here. You don't know how lucky you are because years ago when I started DJing, If you wanted to buy, you know, lights that look like that, they would cost you an absolute arm and a leg. And, like I've said in previous videos, you had halogen bulbs that were continually blowing and cost an absolute fortune to keep going. Now, I do like the likes of LED lights. OK, I agree, they're getting a little bit samey. Same colours, you know, maybe just a different box. But let's be honest, low power,

Thank you for watching, see you next time.

This transcript was produced automatically from the audio of the video and may contain mistakes.