PRO DJ Stand from Protec Metalwork, DJ Standz. Video 2

Alright folks, video number two on this guy from Protech Metalwork Limited, also known as DJ Stans. Now I did say video number two, I'd show you during the night time, but what I forgot, not necessarily what I forgot to do in video one, but what I suppose I should have done is give you dimensions because it's all well and good looking at it like that, but how big is it? So if I just get a tape measure, we're looking at roughly about four foot across and four foot for everyone who likes it in pounds, shillings and pence. The unit is approximately 122 centimetres. The actual height of the unit is just under 27 inches, which is about 68 centimetres. Now again, for your decks, so one, two, three. Bearing in mind you can put something on the bottom as well. And the bottom plate, if we have a look, is 80 centimetres, which is 31 and a half inches by

40 centimeters which is about 15 and 3 quarter inches all right one thing I may stress or should stress it's very heavy all right now video number two and all right video number one and a half okay now video number two we're going to show this in the dark so what I'm going to do I'm just like giving a bit of a spin so you get a general idea and yes I'm going to scratch the table but the more scratches you've got the more used it looks Let's have a look at this thing. There you go, that's what it looks like from let's say the crowd's point of view. That's what it looks like from the point of view of someone going, have you been there? You know, you're there and you've always got someone next to you going, I can do that, I can do that. Sorry, right, okay. And there it is like that, alright. I'll put a link in the description, practice and enjoy. Thank you.

This transcript was produced automatically from the audio of the video and may contain mistakes.