ULTIMAX DJ Stand - Professional Touring Quality Stands.

0:00 We've got a crossbar there where you can put your lighting

Alright folks, first video on this guy here. It's from a company called Ultimax and it's known as a deck stand or a DJ stand, DJ console. We've got a crossbar there where you can put your lighting. There's two up bars. That is the area where you put your DJ kit. You put your DJ kit on the top and then you've got an area there where, you know, if you've got perhaps your amplifier in a flight case. You could bung that in there. What I'm going to do now is pause the camera and I'll show you how this guy's put together. Okay, here we go. I mean, I'll be honest with you, it is very self-explanatory. If we have a look, we've got one piece there that runs across the floor, you can see that. Then another piece is this area here running down. Third piece, this area here running down. And then...

You've got that piece over there. What I'm going to do now is put that on there. If you can see, one, two, three, four. And those guys down there, four of those. This is what you've got to do. Very simple. Get that and fit that on there like that. And then get these guys and secure them on there. That's it. It's not rocket science. Like that. Right, once you've done that, that's your base. Yeah, decks up there. Right, what I'm going to do now is put the bars in either side. Right, here we go. You can see that. That's one of the bars and we've got holes in it. So, put that in there like that. And then what I'm going to do now is get this guy here and get to the first hole there and that now is going to go through there just like that.

2:24 We've got two of those, one there and one on the other side

So that'll lock it in place, and then of course we've got the wing nut which will attach to that side. There you go, just like that. That's a donkey! Okay so we've put the two uprights in and we've got the bar running across the top. So how does that fit in and what do we have to do? Let's have a look. Well if you can see we've got a bolt Going into this piece, and then we've got that guy there that will secure this onto the upright. We've got two of those, one there and one on the other side. So, that's one part, that's the other part. So if I just, well in fact I'll pause the camera so you can have a look at the two of them. Alright, there we go. So, just a question of putting that on there, that on there,

4:45 This is the second piece

Alright, I'm now going to completely confuse you because I've got two long bits now and I've got another one of those. So how on earth can we have that and that fitted to that? Let's take a look. Okay, what I've basically done here is I've removed the small middle sections and attached instead The long middle sections. Now the small unit over there is suitable let's say for a 19 inch rack mount box but this guy here you could quite happily put one of those coffin flight cases on, couple of CD players, mixer even you know a 19-inch rack mount mixer with two vinyl turntables, CD players, you can get quite a lot on this it's pretty pretty long. Okay there's the first piece we had and This is the second piece. Right, there's a small little clip there. I'm going to remove that now. Right, what I can do now is attach this part into there. OK, we've done that and this area here is now inside here. We've got a hole there and I can put that guy there into there. Right, if we have a look here, these are the original positions where we had these bits that fitted over.

Ok, the easiest way to find out where they go is you notice I've got this lined up here, a hole lined up with the bar that's going upwards and exactly the same the other side. There's the hole, there's the bar. So it's a question of putting that there and then exactly the same

On the other side over there. There you go, two done. Now of course it's just a question of attaching this bar to the top two pieces. So there you go. If you want any more relevant information then follow any links in the description. Practice and enjoy.

This transcript was produced automatically from the audio of the video and may contain mistakes.