Un Boxing of V-MODA 3D Shields for XS and LP M-100

0:00 My second and last video on the unboxing of the V-Moder 3D Shields

Alright guys, my second and last video on the unboxing of the V-Moder 3D Shields. Now in this video we're looking at another set that can be used for the M100s, the wireless M100s, also the LP, and also we've got a set that can be used for the XS, short for extra small. There they are here, so let's do these first. So I just want to point out I did a video yesterday and I mentioned About the, what I classed, I do apologise, my mistake, the extra screws in each of the packs. Well, I was very incorrect. What Vmoda highly recommend and suggest is that you use these screws with your shields. So by all means keep the old ones but use these with your new 3D shields. Now these here are metal again. And I've got on these practice and enjoy. I don't know if you can see that. Now again, this is... These are unique. Completely unique. And these will go on the XS. So I'm just going to unplug that. And there you go. I'm not going to pause the camera here and put them on. Now, I wanted to keep them dark because I like the idea of dark headphones and also the dark shields. Not too much

2:22 Again, these are handmade, all right?

Bang in your face. These are very subdued, very laid back and they serve a purpose. I don't want these to be big, bold and brash. Just nice and suggestive in a very laid back manner. So practice and enjoy on there. Okay so as with the larger shields for the M100s And the LPs, the XS extra small shields come in exactly the same size case with exactly the same, in the UK we call them Allen keys at the top. And also just to show you as well, comes with this, the end of ubiquity. Register now at v-moder.com forward slash register. And every shield is unique and may slightly vary. So again, these are handmade, all right? They're not mass produced. When you have your shield and you send in your design, that pretty much, it's highly, highly likely that that is the only time ever that design will be made. Only use included new screws and screwdriver to install shields. So there you go. So my apologies.

Mind scratches and clean regularly with polishing cloth. Full care guide at v-motor.com forward slash care. So there you go. Alright, so those are the metal for the XS extra small. Now these in here are fibre and I've gone full out here and I've gone for something quite dashing which is red. Because apart from the laid-back feel, you know, on the odd occasion it's nice to, you know what, let's just go full on. Now these headphones here are the LP2 and you'll notice that I've attached the cable there. That's simply because these were last used at the BPM show in the NEC and I just wanted to make sure that no one tried to walk away with the headphones. You'll notice as well, just digressing very slightly,

4:06 With V-Moda, what they've done is they have a separate cable

If you're not familiar with V-Moda, you can plug in the cable into the headphone. Now that's a great feature because it means that if, like on a lot of other headphones, if you pull the cable, it's highly likely that you could pull the internal cables inside the headphone which could make your headphones useless. With V-Moda, what they've done is they have a separate cable. So if let's say you're DJing and all of a sudden you forget and you move away from the DJ console, all that will happen is the cable will pull away from your headphones and it's less, it's not likely, but it's very less likely that you're going to damage the headphones. Okay, but again, just be, it's always a good idea to be wary.

LPs and these are the fiber option. Now I believe these are the cheapest option and by no means are they cheap as in cheap and cheerful because you're still getting something unique. Now on these I put Ellaskins JMBL. JMBL my initials Jonathan Mark Bouvier Lewis and Ellaskins of course is the YouTube channel. Now these are red and I bought these specifically for the m100s that i have that are white because these will just go bling they'll sort of like i mean they'll shout out won't they so i'm just going to put that on there as well so on the black now even that looks pretty funky i think so again it's entirely up to you about the color and also about what you want your shields to be made out of so you could go from fiber

That's going to be a few dollars up pretty much to platinum. Now that's going to cost a great deal, but it's about your budget. So there you go. Go and check out vmoda.com. These are the 3D shields and these are suitable for a variety of the vmoda headphones. And I'll finish off with practice and enjoy also as well what I will do very shortly. I'll take a bunch of pictures of the shields. I'll put them on my Facebook page, set the pictures to open to anyone who wants to look at them in the world and check out the link and that will go to the album of the V-Moda 3D Shields. Practice and enjoy. Thank you.

This transcript was produced automatically from the audio of the video and may contain mistakes.