Adj Mega Go PAR64 Tutorial 2, Static Color and Flash Mode

Alright guys, tutorial number two on the MegaGo Pass 64 from ADJ. In this video I'm going to show you how to set up static colour mode as well as making the unit strobe or flash. Now switch it on first, two switches at the top and with the unit set up so the wording is the right way up we can see below the readout from right to left we have four buttons. From right to left we have down, up, set up then mode. We need to get the unit so we have CL set up on the readout. If I press the mode button on the left hand side we can get to CL and at the moment we can see 17. There are 32 different colours we can get from this unit and we can get to those desired colours by pressing either the up button or the down button.

Once you've got your desired colour press set up and we can see FS00. By getting FS00 what will happen we will have that colour staying static. What we can do now is we can press the up button and we can set the unit to flash as fast or as slow as we want. By getting up to 15 you'll have a high flash and going down we can get more of a slow flash. Once you've got to the desired flash you require you can leave the unit like that. Alternatively as I said if we get up to 00 FS00 you'll have that static colour. Alright I hope that's been a help. Video number 2. Practice and enjoy. Thank you.

This transcript was produced automatically from the audio of the video and may contain mistakes.