Skip to main content
1:15

Playing this video loads it from YouTube, which will receive your IP address.

PACEMAKER. Tutorial, Loading a track

Lesson Intermediate Stage 1: Your First Setup November 2008

Contents of the video

Alright folks, over a period of time I'm going to show you how to use this guy here. It's known as a pacemaker. First of all, look at the top. You should see an input which is basically where you'll plug it into your computer. You'll see a button there with a circle and a line through it and another button with just a line through it. What you need to do is press the one with the circle like so to turn the unit on. You'll see it light up. What we'll do, we'll give it a few seconds, I'll pause the camera and we'll wait until it's booted up. Okay, I've already had tracks playing on this, so with one of the decks shining there, you can see a line. If I press the other one, that's the other deck. This one's shining, I'll double tap the bottom circle twice and now I'll come through to my tracks. I can scroll up and down the particular tracks. Say I want to play any track, once I've selected the track, I'll go from the centre and cross it over to this particular deck. Scroll down, I've already had a track in there previously to disrupt.

Scroll over again to that side and then that track is now on that deck and I can press play. There you go. Video number one, basically showing you how to get a track into one of the decks. Practice and enjoy.

This transcript was produced automatically from the audio of the video and may contain mistakes.

The stages are the way through

Below this line is the back catalogue, newest first. Useful for browsing, but it is not a course - the videos are in the order they were filmed, not the order to learn them in. Work the stages instead: each one assumes the one before it.

Latest DJ Tutor Videos