PIONEER RMX 1000 Break down and Build up tutorial 4 By the DJ Tutor AKA Ellaskins

Alright ladies and gentlemen, video number 4 on the Pioneer RMX1000 also known as the Remix Station. In video number 4 we're looking at the breakdown area and the build up. Now for the partially sighted we have the input LED on and I'm now going to move the centre dial at the centre of the breakdown and break up. At the moment you're listening to LPF Echo which is a low pass filter echo.

High pass filter echo, crush echo, spiral down, reverb down, BPF echo, echo, noise. Just a point there, be very careful about using that because if you haven't set the LEDs correctly on your mixer, you could get quite a few peaks. So watch your speakers. Spiral up and reverb up. Again, well set out. It does exactly as it should. We have break down, the low feel effects, build up, the build up effects. Very important here as well, far right centre point on the RMX1000 we have the input button. For the partially sighted at the moment that's highlighted with an amber LED. If we disengage that now we don't have any amber LED. Press any of them. As before, they're flashing. We won't get any change in sound. That's because we've disengaged the audio going to those effects. So I've now set the dial to 12 o'clock. We have reverb down.

Down, disengage, press HPF, echo, engage the input, disengage. Video number four, practice and enjoy. Thank you.

This transcript was produced automatically from the audio of the video and may contain mistakes.